American Standard - Platinum Series 4 Ton, 20.5 SEER, Gas Furnace Split System
This Product Qualifies For FREE US Shipping
7530
American Standard
In stock ships within 24 to 48 hours
Brand New
CALL FOR PRICE AND AVAILABILITY
American Standard 4A7V0048A1000B - Platinum Series 4 Ton, 20 SEER, Variable Speed Air Conditioner Unit, 208-230/1/60
American Standard AccuComfort™ Platinum Series Air Conditioner
Features:
- SEER up to 18 (depending on matchup)
- Duration™ compressor
- Number of stages - Variable
- Comfort-R™ mode approved
- AccuLink™ system
- DuraBase™ base, fast complete drain, weatherproof
- Easy-Sess™ cabinet, service access
- Spine Fin™ coil
- Compressor sound enclosure
- Compressor sump heat
- Factory supplied charge R-410A
- Glossy corrosion resistant finish
- High pressure switch
- Low pressure switch
- Internal high / low pressure & temperature protection
- Liquid line filter drier - factory installed or factory supplied for field install
- Spinnaker gray cabinet
- 12-year registered limited warranty on compressor,10-year on outdoor coil & all other functional parts (Residential Use) - See product warranty documents for complete details
- Extended warranties available
Platinum Series, 80% Induced Draft Upflow Horizontal Left/Right, Two Stage Gas Furnace. The Platinum Series High Efficiency Gas Furnaces employ a Hot Surface Ignition system, which eliminates the waste of a constant burning pilot. The integrated system control lights the main burners upon a demand for heat from the room thermostat. Complete front service access: a) Low energy power venter. b) Vent proving pressure switch.
General Features
Communicating Mode
Furnace is shipped ready to be connected in communicating mode using three wire hook-up using ACONT900 comfort control.
Alternate 24V Mode
Furnace is field configurable to 24V no communicating mode.
Comfort Control
AccuLink II™ Communicating furnace design, offers plug and play - walk away installation. Assures the entire heating and air conditioning system is set up in the proper modes to optimize the engineered performance of the matched system installed.
Natural Gas Models
Central Heating furnace designs are certified by the American Gas Association for both natural and L.P. gas. Limit setting and rating data were established and approved under standard rating conditions using American National Standards Institute standards.
Safe Operation
The Integrated System Control has solid state devices, which continuously monitor for presence of flame, when the system is in the heating mode of operation. Dual solenoid combination gas valve and regulator provide extra safety.
Quick Heating
Durable, cycle tested, heavy gauge aluminized steel heat exchanger quickly transfers heat to provide warm conditioned air to the structure. Low energy power vent blower, to increase efficiency and provide a positive discharge of gas fumes to the outside.
Burners
Multiport In-shot burners will give years of quiet and efficient service. All models can be converted to L.P. gas.
Integrated System Control
Exclusively designed operational program provides total control of furnace limit sensors, blowers, gas valve, flame control and includes self diagnostics for ease of service. Also includes connection points for E.A.C./humidifier.
Air Delivery
The variable speed, direct drive blower motor, has sufficient airflow for most heating and cooling requirements, will switch from heating to cooling speeds on demand from room thermostat. The blower door safety switch will prevent or terminate furnace operation when the blower door is removed.
Styling
Heavy gauge steel and "wrap-around" cabinet construction is used in the cabinet with baked-on enamel finish for strength and beauty. The heat exchanger section of the cabinet is completely lined with foil faced fiberglass insulation. This results in quiet and efficient operation due to the excellent acoustical and insulating qualities of fiberglass. Built-in bottom pan and alternate bottom, left or right side return air connection provision.
General Features
Communicating Mode
Furnace is shipped ready to be connected in communicating mode using three wire hook-up using ACONT900 comfort control.
Alternate 24V Mode
Furnace is field configurable to 24V no communicating mode.
Comfort Control
AccuLink II™ Communicating furnace design, offers plug and play - walk away installation. Assures the entire heating and air conditioning system is set up in the proper modes to optimize the engineered performance of the matched system installed.
Natural Gas Models
Central Heating furnace designs are certified by the American Gas Association for both natural and L.P. gas. Limit setting and rating data were established and approved under standard rating conditions using American National Standards Institute standards.
Safe Operation
The Integrated System Control has solid state devices, which continuously monitor for presence of flame, when the system is in the heating mode of operation. Dual solenoid combination gas valve and regulator provide extra safety.
Quick Heating
Durable, cycle tested, heavy gauge aluminized steel heat exchanger quickly transfers heat to provide warm conditioned air to the structure. Low energy power vent blower, to increase efficiency and provide a positive discharge of gas fumes to the outside.
Burners
Multiport In-shot burners will give years of quiet and efficient service. All models can be converted to L.P. gas.
Integrated System Control
Exclusively designed operational program provides total control of furnace limit sensors, blowers, gas valve, flame control and includes self diagnostics for ease of service. Also includes connection points for E.A.C./humidifier.
Air Delivery
The variable speed, direct drive blower motor, has sufficient airflow for most heating and cooling requirements, will switch from heating to cooling speeds on demand from room thermostat. The blower door safety switch will prevent or terminate furnace operation when the blower door is removed.
Styling
Heavy gauge steel and "wrap-around" cabinet construction is used in the cabinet with baked-on enamel finish for strength and beauty. The heat exchanger section of the cabinet is completely lined with foil faced fiberglass insulation. This results in quiet and efficient operation due to the excellent acoustical and insulating qualities of fiberglass. Built-in bottom pan and alternate bottom, left or right side return air connection provision.
American Standard 4PXCCU48AC3HAA - 4 Ton, Aluminum High Efficiency Staged System Cased Coil, Dedicated Upflow, Convertible To Horizontal Left With Kit.
| Name | American Standard 4A7V0048A1000B - Platinum Series 4 Ton, 20 SEER, Variable Speed Air Conditioner Unit, 208-230/1/60 |
|---|---|
| Item Number | 4A7V0048A1000B |
| Manufacturer Product Number | 4A7V0048A1000B |
| SKU - PIM Number | 1463214709254 |
| ERP Number | 340167 |
| Unit of Measure | EA |
| Weight | 245.0 Pounds (Lb) |
| Length | 34.0 Inches (In) |
| Width | 37.0 Inches (In) |
| Height | 41.0 Inches (In) |
| Country of Origin | USA |
| Brand | American Standard |
| Equipment Type | Straight Cool |
| Tonnage | 4 |
| Stage | Single |
| SEER | 20 |
| EER | 12.5-13 |
| Refrigerant | R-410a |
| CFM | 4560 |
| Cooling Capacity | 48000 |
| Voltage | 208-230 VAC |
| Full Load Amps | 2.8 |
| Phase | Single |
| Cycle/Hertz | 60 Hz |
| Circuit Breaker - Min Amps | 23 |
| Circuit Breaker - Max Amps | 35 |
| Condenser Motor HP | 1/3 HP |
| Condenser Motor Speeds | Variable |
| Rated Load Amps | 16 |
| Locked Rotor Amps | 12 |
| Suction Line Fitting | Sweat or Braze |
| Suction Line Size (OD) | 7/8" |
| Liquid Line Fitting | Sweat or Braze |
| Liquid Line Size (OD) | 3/8" |
| Certifications | AHRI 210/240 Certified |
| Color | Gray |
| Compressor | (1) Scroll |
| Inverter | Yes |
| Maximum Piping Length | 80' |
| Number of Fan Blades | 1 |
| Sound Level (dBA) | 57-74 |
| Warranty Offered | Yes |
| Energy Star Rated | No |
| UL Listed | No |
| Fins per Inch | 24 |
| Product Family | 4A7V0 |
| Name | American Standard AUD2C100ACV52A - Platinum Series, 100K BTUH 80% Upflow Horizontal Left/Right, 2-Stage Gas Furnace |
|---|---|
| Item Number | AUD2C100ACV52A |
| Manufacturer Product Number | AUD2C100ACV52A |
| SKU - PIM Number | 1386941893586 |
| ERP Number | 248223 |
| Unit of Measure | EA |
| Weight | 155.0 Pounds (Lb) |
| Length | 28.5 Inches (In) |
| Width | 21.0 Inches (In) |
| Height | 40.5 Inches (In) |
| Country of Origin | USA |
| Brand | American Standard |
| Equipment Type | Furnace |
| Stage | Two |
| AFUE | 80% |
| Air Flow | Upflow / Horizontal |
| BTU Input | 100000 |
| BTU Output | 52000-79000 |
| Voltage | 115 VAC |
| Phase | Single |
| Cycle/Hertz | 60 Hz |
| Circuit Breaker - Max Amps | 15 |
| Ignition Type | Silicon Nitride |
| Comments/Notes | Upflow/Horizontal |
| Fuel Type | Natural Gas |
| Warranty Offered | Yes |
| Energy Star Rated | No |
| UL Listed | No |
| Product Family | AUD2 |
| Tonnage | 5 |
| Flue Size | 4 |
| Tier | Platinum 80 |
| Name | American Standard 4PXCCU48BS3HAA - 4 Ton, Aluminum High Efficiency Staged System Cased Coil, Dedicated Upflow |
|---|---|
| Item Number | 4PXCCU48BS3HAA |
| Manufacturer Product Number | 4PXCCU48BS3HAA |
| SKU - PIM Number | 1470442904460 |
| ERP Number | 366528 |
| Unit of Measure | EA |
| Weight | 56.0 Pounds (Lb) |
| Length | 21.5 Inches (In) |
| Width | 21.0 Inches (In) |
| Height | 26.9 Inches (In) |
| Country of Origin | USA |
| Brand | American Standard |
| Equipment Type | Heat Pump |
| Tonnage | 4 |
| SEER | 14 |
| Refrigerant | R-410a |
| Cooling Capacity | 48000 |
| Air Flow | Upflow |
| Drain Connection Size | 3/4" |
| Suction Line Fitting | Sweat or Braze |
| Suction Line Size (OD) | 7/8" |
| Liquid Line Fitting | Sweat or Braze |
| Liquid Line Size (OD) | 3/8" |
| Application | Heat Pump |
| Cased | Yes |
| Color | Aluminum |
| Warranty Offered | Yes |
| Energy Star Rated | No |
| UL Listed | No |
| UL Recognized | No |
| Product Family | 4PXC |
| Drain Connections | 2 |
| Composition | Aluminum |