Rheem 3 Ton 14 Seer Heat Pump Variable Speed System

The Rheem RP14 Heat Pump is part of the Rheem heat pump product line that extends from 14 to 20 SEER. This highly featured and reliable heat pump is designed for years of reliable, efficient operation when matched with Rheem indoor aluminum evaporator coils and furnaces or air handler units with aluminum evaporators. Our unique composite base reduces sound emission, eliminates rattles, significantly reduces fasteners, eliminates corrosion and has integrated brass compressor attachment inserts. Furthermore it has incorporated into the design, water management features, means for hand placement for unit maneuvering, screw trays and inserts for lifting unit off pad.

Standard Features:
 

• Rheem Efficiencies: 14 SEER/11.5 EER 8.2 HSPF
• New composite base pan
• Improved tubing design
• Optimized defrost characteristics
• Powder coat paint system
• Optimized reversing valve sizing
• Enhanced mufflers
• Scroll compressor
• Modern cabinet aesthetics
• Curved louver panels
• Optimized fan orifice
• Rust resistant screws
• PlusOne Expanded Valve Space 3 4 5 service valve space
• Integrated heat pump lift receptacle allows standard CPVC stands to be inserted into the base
• PlusOne Triple Service Access 15 wide, industry leading corner service access
• Diagnostic service window with two-fastener opening
• External gauge port access
• Single-row condenser coil
• 35% fewer cabinet fasteners and fastener-free base
• Service trays
• QR code
• Fan motor harness with extra-long wires

The Rheem/Ruud RH1V Air Handler includes an energy efficient ECM Motor, which in most applications, enhances the SEER rating of the outdoor unit. It also slowly ramps its speed up for quiet operation and enhanced customer satisfaction. The Rheem/Ruud RH1V comes in a versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications. Also, it has a nominal airflow up to 1.0 external static pressure. It comes with a factory-installed indoor coil.

Standard Features:
 

• Quiet, efficient ECM motor technology providing nominal airflow up to 1.0 inch [25 kPa] of external static pressure.
• Interface board with dip switches conveniently located in the blower compartment allows for precise, field selectable air-flow to meet the requirements of particular applications.
• Selectable continuous fan on options.
• The most compact unit design available.
• Attractive pre-painted cabinet exterior.
• Rugged steel cabinet construction, designed for added strength and versatility.
• 1.0 foil faced insulation mechanically retained in blower compartment.
• Four leg rubber insulated motor mount.
• Field-installed auxiliary heater kit includes circuit breakers that meet UL and cUL requirements as a service disconnect switch.
• Blower housing with integrated controls, motor and blower.
• Slide out design for service and maintenance convenience.
• Field convertible for vertical upflow, vertical downflow, horizontal left hand or right-hand air supply.
• Combustible floor base accessory available when required for downflow installations on combustible floors.
• Indoor coil design provides low air side pressure drop, high-performance and extremely compact size. All coils come withPVC condensate elbow standard

Cabinet Features:
 

• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing.
• Coils are tested at the factory with an extensive refrigerant leak check.
• Coils have copper sweat refrigerant connections.
• Coils utilize chatleff metering device connections.
• Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils.
• Supply duct flanges provided as standard on air handler cabinet.
• Provisions for field electrical connections available from either side or top of the air handler cabinet.
• Connection point for high voltage wiring is inside the air handler cabinet.
• Low voltage connection is made on the outside of the air handler cabinet.
• Concentric knockouts are provided for power connection to cabinet.
• Installer may pull desired hole size up to 2 inches, 51 mm, for 1 1/2 inch, 38 mm conduit.
• Front refrigerant and drain connections.

• Model Number(s)RP1436AJ1NA - RH1V3617STANJA
• BrandRheem
• TypeHeat Pump
• Ton3.0 Ton
• SEER14
• HSPF8.20
• Cooling Btu35,200
• Heating Btu38,400
• Cooling Stage(s)1
• Compressor StageSingle
• Blower ApplicationMulti-Position
• Voltage208/230V
• Electrical Phase(s)1
• Hertz (Hz)60
• Decibel Level (dB)74
• BlowerVariable Speed
• Maximum CFM1,200
• Refrigerant TypeR-410A
• Suction Valve Size (Inches)7/8
• Liquid Valve Size (Inches)3/8
• Total Shipping Weight (lbs.)282
• Outdoor Unit Height (Inches)27
• Outdoor Unit Width (Inches)33 3/4
• Outdoor Unit Depth (Inches)33 3/4
• Indoor Unit Height (Inches)42 1/2
• Indoor Unit Width (Inches)17 1/2
• Indoor Unit Depth (Inches)21 11/16
• Parts Warranty (Years)10
• Compressor Warranty (Years)10
•