Rheem - RBHP Series Multiposition Air Handler With X-13 (ECM) Motor, Up To 16 SEER R410A, 7 kW Electric Heat

Industry Standard R410A Refrigerant Applications

Models featuring Electric Heat without Indoor Cooling Coil

Quiet and efficient X-13 (ECM) motor technology

Only 35" tall and 4-way convertible for all those tight spaces

Available from factory in upflow and horizontal configurations

Nominal airflow up to 0.5" external static pressure with reduced airflow up to 1.0" external static pressure

Factory installed MultiFlex® coils

Sturdy steel construction with 1" (25.4 mm) of foil faced insulation for excellent sound and insulating characteristics

Permanent, easily accessible and washable filter furnished standard

Circuit breaker (standard on units with more than 11 kW) meets U.L. and cUL requirements for service disconnect

Factory installed auxiliary electric heat provides exact heat for indoor comfort over a variety of applications

Watt restrictors, standard on RBHP-17 models above 6 kW and on RBHP-21, RBHP-24 and RBHP-25 models above 11 kW, stage supplemental heat so that only the necessary amount is engaged to maintain comfort in the conditioned space

Fan settings for selectable, customized cooling airflow over a wide variety of applications

Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

Engineering Features

Quiet, efficient X-13 (ECM) motor technology providing nominal airflow to 0.5 inch (12 kPa) of external static pressure.

Field selectable airflow to meet the requirements of particular applications.

Low continuous fan speed.

The most compact unit design available.

Attractive pre-painted cabinet exterior.

Rugged steel cabinet construction, designed for added strength and versatility.

1" foil faced insulation mechanically retained in blower compartment.

Four leg rubber insulated wire motor mount.

Circuit breakers standard on models above 11 kW and optional on models with 11 kW or less.

Models supplied with circuit breakers meet UL and cUL requirements as a service disconnect switch.

Provisions for field electrical connections from either side of air handler cabinet.

Tab lock blower housing with integrated electric heaters, controls, motor and blower. Slide out design for service and maintenance convenience.

Exclusive dependable Incoloy sheath type electric heating elements located in the blower housing provide mixed warm air.

Field convertible for vertical upflow, vertical downflow, horizontal left hand or right hand air supply.

Common combustible floor base accessory fits all model sizes when required for downflow installations on combustible floors.

Durable framed cleanable air filter provided as standard in unit filter rack.

MultiFlex® indoor coil design provides low air side pressure drop, high performance and extremely compact size. All coils come with PVC condensate elbow standard.

All indoor coils have tinned copper tubing and aluminum fins.

Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils.

Both supply and return duct flanges provided as standard on air handler cabinet.

Connection points for both high voltage and low voltage control wiring inside air handler cabinet.

Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2 inches (51 mm) for 1 1/2 inch (38 mm) conduit.

Patented watt restrictor on heat pump models to control electric heat during heating operation.

Internal checked TX valves are used on the RCHL indoor coil for more quiet refrigerant metering.

Front refrigerant and drain connections